TxGoldDigger Posted April 11, 2017 Report Share Posted April 11, 2017 I was wondering if anyone would share their settings that they use with the NF Evo coils....I am going to go out and test some, but maybe some of yours would be a good place to start....and / or end.....all help appreciated Quote Link to comment Share on other sites More sharing options...
Mxt Sniper Posted April 11, 2017 Report Share Posted April 11, 2017 I havn't found my settings to be much different with the Evo Coil than with my original equipment coils on my gpx4500. They tend to not work as well in wet ground so keep a few oe coils along for the ride. Quote Link to comment Share on other sites More sharing options...
oldies1955 Posted April 12, 2017 Report Share Posted April 12, 2017 Same here. Im pretty much using the same settings as I used with my Coiltek. The EVO is a lot more sensitive and seems to do better over hot ground than my other coil. Tom H. Quote Link to comment Share on other sites More sharing options...
AuWanderer Posted April 13, 2017 Report Share Posted April 13, 2017 Well my experience with the Evo coils is that they are very sensitive to mineralized hot spots, you will be digging more fanthom signals. Although it runs well in settings you may have used with other coils. I would reduce the gain a bit and run it in Enhanced. Otherwise its pretty stable good coil. Quote Link to comment Share on other sites More sharing options...
Admin nuggethunting Posted April 13, 2017 Admin Report Share Posted April 13, 2017 Hey TxGoldDigger, Like most of the other guys stated, I'm using pretty much the same settings. The EVO coils are more sensitive and get a bit more depth in my opinion over the standard NF Advantage coils. For me here in Arizona, I use the Special/Sensitive/Extra for prospecting. I have used Normal and Sharp timing to achieve more depth in some areas. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.